Bad BSOD Error is one of the deadliest codes that can often result from malfunctioning device drivers or inconsistent handheld table access conditions. In either situation, these mistakes surely bother you but then you don’t have to worry. To get rid of it, check out the method provided to find out why it happened and different ways to fix bad_exhandle BSOD error in windows 10.

4 Ways to Fix BAD_EXHANDLE BSOD Error in Windows 10

Method 1: Update Device Drive:

As we know, device drivers play a key role in making the hardware work properly. However, if you encounter the BAD_ EXHANDLE BSOD Error, then there may be a problem due to outdated or corrupted drivers on your system. So follow the steps provided to learn how to easily solve a problem.

  • On the Taskbar, click on the Start Menu.
  • Type in the Run Run dialog box.
  • Type devmgr.msc and press the Enter button.
  • In Device Manager, click on the best match and expand it.
  • Right-click on an outdated driver.
  • Click on Update Driver and continue.
  • Next, select “Auto Search for updated drive software.”
  • Once the update is complete, update the remaining drivers and resolve this problem.

Method 2: Boot in Safe Mode on Windows 10:

If you have a BSOD Error problem, be sure to follow the instructions below to fix it. For this, users need to boot the Windows 10 operating system in Safe mode. Here’s how:

  • First, press the Win + S button at the same time on your keyboard.
  • Press the Enter button and continue.
  • Next, set the view to the Control Panel Small Icon.
  • Click on System Configuration.
  • Then switch to the Boot tab.
  • Now find your way to the Boot option.
  • Click on Safe Boot.
  • Select the radio option set as Minimal.
  • Tap on Apply and then Ok to confirm the change.
  • After that, reboot your system.
  • When the PC is powered, press and hold the F8 button.
  • Select Sage Mode from the following list.
  • Finally, sneak into Safe Mode safely.

Method 3: Clear the Temp files from your Disk

There is no doubt that this Bad BSOD Error occurred due to a temporary file found on your Windows 10 system. Therefore, follow the steps below to clean your disk and resolve the problem accordingly.

  • On the Start Menu, select the Run dialog box.
  • Type cleanmgr into the required box.
  • Press the Enter button and continue.
  • Type, Ok, where C: is selected.
  • Next, click on the System cleanup file.
  • Press Ok to apply the change.
  • Check out all the options under “Files to delete.”
  • Again, tap Ok and wait for the cleanup process to finish.

Method 4: Run System File Checker

Users can also use the Windows 10 System file check option to eliminate the hassle. If you do not know how to do this, it is strongly recommended to review the guidelines listed to learn it.

  • To get started, press the Win + R button on your keyboard.
  • In the Run Dialog Box, type CMD.exe.
  • Tap the Enter button and continue.
  • In the Command Prompt arrow, enter the SFC / scannow command.
  • Press the Enter button again.
  • Next, wait for the process to resolve.

All in all, the methods mentioned above are one of the best solutions to solve problems easily. So, to fix the Bad_EXHANDLE BSOD Error code, follow the above-given steps correctly.

Author: Nick Jackson

Nick Jackson was born and raised up in Atlanta, is a well qualified technical writer with hands-on experience of technology-related topics as well as non-technical writing.

0 0 vote
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments